Pipeng Toolbox : Key Word Search Modules Login
Short Cuts
GO
Main ±
Beams ±
References ±
Fluid Flow ±
Fluid Properties ±
Maths ±
Materials ±
Pipelines ±
Soils ±
Subsea ±
Data ±
Units ±
Help ±
Demo

Gas Viscosity Modules

Keyword(s) Gas Viscosity. For a new search enter search key word(s) then click GO GO

Links : ±
CALCULATOR MODULE : Compressible Flow Gas Property   ±

Calculate compressible flow gas properties.

Calculate gas specific heat constant pressure, specific heat constant volume, specific heat ratio, molar mass, gas constant, gas specific gravity, gas compressibility factor and density from gas temperature and pressure. The gas compressibility factor is calculated from the critical point temperature, critical point temperature, and the accentric factor using either the Peng Robinson, Soave, Redlich Kwong or Van Der Waals equation of state (EOS).

Reference : Fluid Mechanics, Frank M White, McGraw Hill

Change Module :

Related Modules :

CALCULATOR MODULE : Two Phase Gas Liquid Viscosity   ±

Calculate dynamic and kinematic viscosity for two phase gas liquids (gas and oil or gas and liquid).

Kinematic viscosity is equal to the dynamic viscosity divided by the density of the fluid. The viscosity of two phase fluids and mixtures can be calculated from the dynamic viscosity and the volume fraction. The gas oil ratio is the ratio of gas moles to oil volume. It is often measured as gas standard volume (scf or scm) per oil volume (barrels, gallons, cubic feet or cubic meters).

Change Module :

Related Modules :

CALCULATOR MODULE : Three Phase Gas Oil Water (Black Oil) Viscosity   ±

Calculate dynamic and kinematic viscosity for three phase black oil (gas oil and water).

Kinematic viscosity is equal to the dynamic viscosity divided by the density of the fluid. The viscosity of two phase fluids and mixtures can be calculated from the dynamic viscosity and the volume fraction.

The gas oil ratio is the ratio of gas moles to oil volume. The gas mass fraction is the ratio of gas mass to total fluid mass. The gas volume fraction is the ratio of gas volume to total fluid volume. Water cut is the ratio of water volume over total liquid volume (equals the water volume fraction in the liquid). Gas volume is dependent on fluid temperature and pressure. Gas oil ratio is often measured as gas standard volume (scf or scm) per oil volume (barrels, gallons, cubic feet or cubic meters).

Change Module :

Related Modules :

CALCULATOR MODULE : Gas Kinematic And Dynamic Viscosity   ±

Calculate dynamic viscosity and kinematic viscosity for single phase gas.

Kinematic viscosity is equal to the dynamic viscosity divided by the density of the fluid. Gas specific gravity (SG) equals the gas molar mass divided by the molar mass of air (28.964 kg/kg-mol).

Change Module :

Related Modules :

CALCULATOR MODULE : Fluid Mixture From Kay's Rule   ±

Calculate pseudo-critical properties (temperature, pressure, accentric factor, molar mass) of a fluid mixture using the simple form of Kay's rule with no interaction parameters.

The mole fraction of component one is automatically adjusted so that the sum of the mole fractions equals one. The mixture properties are approximate.

    Related Modules :

    DATA MODULE : Fluid Density And Specific Gravity ( Open In Popup Workbook )   ±
    DATA MODULE : Fluid Dynamic And Kinematic Viscosity ( Open In Popup Workbook )   ±
    pipeng.com 2026 (1,116 μs : 6 ms : 1.314 MB) Pengu CMS ©